With in-house quality testing and certification, you can count on quality materials delivered with proper documentation.
Low Fin Tubes with Internal Ridges Manufacturer
FIN TUBES : Low Fin Tubes with Internal Ridges | Integral Low Fin Tubes | Stainless Steel Low Fin Tubes with Internal Ridges| Cupro Nickel Low Fin Tubes with Internal Ridges
Stainless Steel Low Fin Tubes with Internal Ridges, Stainless Steel Integral Low Fin Tubes Manufacturer in India, Steel Integral Low Fin Tubes Exporter in Australia.
Low fin tubes with internal ridges are specialized heat exchanger tubes designed to further enhance heat transfer efficiency in specific industrial applications. These tubes feature both external low-height fins and internal ridges, providing a unique combination of extended surface area and improved fluid flow characteristics.
The low-height external fins increase the heat transfer surface area, allowing for better heat exchange between the fluid inside the tube and the surrounding medium. Meanwhile, the internal ridges promote turbulence within the fluid flow, enhancing convective heat transfer and further improving overall heat transfer performance.
The combination of low fins and internal ridges in these tubes makes them particularly suitable for applications that require highly efficient heat dissipation or heating. They are commonly used in air-cooled heat exchangers, air coolers, and other industrial processes where space limitations and optimal heat transfer are critical factors.
The presence of internal ridges also helps mitigate potential issues related to flow fouling and flow-induced vibrations, making low fin tubes with internal ridges a reliable and durable solution for heat transfer applications.
These tubes are often manufactured using materials like copper, aluminum, stainless steel, or carbon steel, depending on the specific requirements of the application and the environmental conditions.
Copper Nickel Low Fin Tubes with Internal Ridges Exporter in Dubai, Steel Low Fin Tubes with Internal Ridges Stockiest, Supplier.
Let’s discuss about your ongoing project
- Base Tube Diameter: 5/8’’ & 3/4″ (15.8 mm & 19.05 mm)
- Tube Material: Stainless Steel / Copper / Cupro-Nickel
- Fin Pitch: 19 FPI and 26 FPI
- Length: upto 10 Meters. (33 Feet)
Low Fin Tubes with Internal Ridges are marked in requirement of the international standards. Format: ” BRAND-SIZE-SPECIFICATION-GRADE-HEAT NUMBER-LOT NUMBER “
This marking helps for the identification of the SS Low Fin Tubes with Internal Ridges and supported with the Material Test Report. It is 100% traceable to our mill.
Low Fin Tubes with Internal Ridges Quality Control
To ensure a quality product, MPJ is holding certificate ISO 9001:2015, ISO 45001, OHSAS 14001, & CE-PED. We are also members of various renowned agencies and Chambers of Commerce including MASSMA, EEPC, FICCI, FIEO, Indian Merchants Chamber, etc. With state-of-the-art manufacturing processes, contemporary technologies, and proficient services, we consider: offering the finest quality, best in class products. Compliance with specifications as per Standards, Outer Diameter, Thickness, Inside Diameter, Inside Finish, Marking, Ends, and Finishing. This ensures that we never face a rejection of the Stainless Steel Low Fin Tubes with Internal Ridges supplied.
Low Fin Tubes with Internal Ridges Packing & Documentation
Internal Low Fin Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel Low Fin Tubes with Internal Ridges is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container.
MPJ Provide Integral Low Fin Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Cupro Nickel Low Fin Tubes with Internal Ridges.
We also confirm the guarantee of the Cupro Nickel Low Fin Tubes with Internal Ridges supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Low Fin Tubes with Internal Ridges Application Industries
- Oil & Gas Exploration
- Petrochemicals and Refineries
- Cross Country Pipe Line for Gas & Water
- Pipes for Engineering purpose
- Thermal, Nuclear and Solar Power Plants
- Desalination Plants
- Chemical Industries
- Atomic Energy
- Food and Dairy
People Also Search For
Low Fin Tubes with Internal Ridges Supplier in Australia | Stanless Steel Low Fin Tubes with Internal Ridges Exporter in Qatar | SS Low Fin Tubes with Internal Ridges Stockiest in India | Stainless Steel Integral Low Fin Tubes | Low Fin Tubes with Internal Ridges Specification | Low Fin Tubes with Internal Ridges Stockiest in India | Low Fin Tubo with Internal Ridges | Low Fin Tubes with Internal Ridges Sizes in Stock | Low Fin Tubes with Internal Ridges Forms in Stock.
Integral Low Fin Tubes Inspection & Material Specification | Low Fin Tubes with Internal Ridges Size | Low Fin Tubes with Internal Ridges Installation | Low Fin Tubes with Internal Ridges Exporter in Qatar | Low Fin Tubes with Internal Ridges Installation Guidelines | Low Fin Tubes with Internal Ridges OD | Integral Low Fin Tubes Supplier in South Africa | SS Low Fin Tubes with Internal Ridges Price in India | Low Fin Tubes with Internal Ridges Dimensions, Diameter, Thickness and Drawing | Integral Low Fin Tubes Stockiest in India.
Industrial Pipes & Tubes Supply and Export Network Countries List
|Azerbaijan||Belarus||Belgium||Bosnia and Herzegovina|
|United Kingdom||Vatican City|
|Burkina Faso||Burundi||Cabo Verde||Cameroon|
|Central African Republic (CAR)||Chad||Comoros||The Democratic Republic of the Congo|
|Republic of the Congo||Cote d’Ivoire||Djibouti||Egypt|
|Niger||Nigeria||Rwanda||Sao Tome and Principe|
|South Africa||South Sudan||Sudan||Swaziland|
|Antigua and Barbuda||Bahamas||Barbados||Belize|
|Dominican Republic||El Salvador||Grenada||Guatemala|
|Nicaragua||Panama||Saint Kitts and Nevis||Saint Lucia|
|Saint Vincent and the Grenadines||Trinidad and Tobago||United States of America||Argentina|
|Saudi Arabia||Singapore||South Korea||Sri Lanka|
|Timor-Leste||Turkey||Turkmenistan||United Arab Emirates (UAE)|
|Papua New Guinea||Samoa||Solomon Islands||Tonga|