With in-house quality testing and certification, you can count on quality materials delivered with proper documentation.
G Type Fin Tube Manufacturer
FIN TUBES : G Type Fins | Embedded Fin Tubes | G Fin Tube | Stainless Steel G Fin Tube| Cupro Nickel G Fin Tube
Stainless Steel G Type Fins, Stainless Steel G Type Fins Tubes Manufacturer in India, Steel G Type Fins Exporter in Australia.
G-type fin tubes are a specific type of extended surface heat exchanger tubes that feature a distinctive “G-shaped” fin profile. These finned tubes are used to enhance heat transfer between fluids in various industrial applications, particularly in air-cooled heat exchangers and other heat transfer equipment.
The G-shaped fin design of these tubes provides a larger surface area compared to smooth tubes, which significantly improves the efficiency of heat transfer. This design allows for better heat exchange between the fluid inside the tube and the fluid outside (usually air) that flows over the fins. As a result, G-type fin tubes are ideal for applications where air-side heat transfer is crucial, such as in air-cooled heat exchangers used for cooling processes in power plants, refineries, and other industrial facilities.
The design of G-type fin tubes allows for efficient heat dissipation and better performance in high-temperature applications. The fins are typically made from materials like aluminum or copper due to their excellent thermal conductivity and corrosion resistance. The base tubes, on the other hand, are often made from materials such as carbon steel, stainless steel, or copper-nickel alloys, depending on the specific requirements of the application.
G-type fin tubes can be manufactured in various configurations, including straight finned tubes, helical finned tubes, and integral finned tubes. The choice of configuration and materials depends on the specific heat transfer needs and environmental conditions of the application.
Copper Nickel G Type Fins Tube Exporter in Dubai, Aluminium G Type Fins Stockiest, Brass G Type Fins Tube Supplier
Let’s discuss about your ongoing project
- Base Tube Diameter: 1/2’’ to 4” (12.7 mm to 101.6 mm)
- Tube Material: Stainless Steel / Copper / Cupro-Nickel
- Fin Material: Stainless Steel / Copper / Aluminium / Brass
- Fin Height: 1/2’’ to 5/8’’ (12.7 mm to 15.87 mm)
- Fin Pitch: 8fins/inch to 11 fins/ inch (316 fins/meter to 433 fins/meter)
G Type Fins Tube are marked in requirement of the international standards. Format: ” BRAND-SIZE-SPECIFICATION-GRADE-HEAT NUMBER-LOT NUMBER “
This marking helps for the identification of the G Type Fins Tube and supported with the Material Test Report. It is 100% traceable to our mill.
G Type Fins Tube Quality Control
To ensure a quality product, MPJ is holding certificate ISO 9001:2015, ISO 45001, OHSAS 14001, & CE-PED. We are also members of various renowned agencies and Chambers of Commerce including MASSMA, EEPC, FICCI, FIEO, Indian Merchants Chamber, etc. With state-of-the-art manufacturing processes, contemporary technologies, and proficient services, we consider: offering the finest quality, best in class products. Compliance with specifications as per Standards, Outer Diameter, Thickness, Inside Diameter, Inside Finish, Marking, Ends, and Finishing. This ensures that we never face a rejection of the Stainless Steel G Type Fins Tube supplied.
G Type Fins Tube Packing & Documentation
G Type Fins Tube are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel G Type Fins Tube is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container.
MPJ Provide G Type Fins Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Cupro Nickel G Type Fins Tube.
We also confirm the guarantee of the Aluminium G Type Fins Tube supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
G Type Fins Tube Application Industries
- Oil & Gas Exploration
- Petrochemicals and Refineries
- Cross Country Pipe Line for Gas & Water
- Pipes for Engineering purpose
- Thermal, Nuclear and Solar Power Plants
- Desalination Plants
- Chemical Industries
- Atomic Energy
- Food and Dairy
People Also Search For
G Type Fins Supplier in Australia | Stanless Steel G Type Fins Tube Exporter in Qatar | SS G Type Fins Tube Stockiest in India | Stainless Steel G Type Fins Tubes | G Type Fins Specification | G Type Fins Stockiest in India | G Type Fins Tubo | G Type Fins Tube Sizes in Stock | G Type Fins Tube Forms in Stock.
G Type Fins Tube Inspection & Material Specification | G Type Fins Tube Size | G Type Fins Tubes Installation | G Type Fins Tubes Exporter in Qatar | G Type Fins Tube Installation Guidelines | G Type Fins Tube OD | G Type Fins Tube Supplier in South Africa | SS G Type Fins Tube Price in India | G Type Fins Tube Dimensions, Diameter, Thickness and Drawing | G Type Fins Tube Stockiest in India.
Industrial Pipes & Tubes Supply and Export Network Countries List
|Azerbaijan||Belarus||Belgium||Bosnia and Herzegovina|
|United Kingdom||Vatican City|
|Burkina Faso||Burundi||Cabo Verde||Cameroon|
|Central African Republic (CAR)||Chad||Comoros||The Democratic Republic of the Congo|
|Republic of the Congo||Cote d’Ivoire||Djibouti||Egypt|
|Niger||Nigeria||Rwanda||Sao Tome and Principe|
|South Africa||South Sudan||Sudan||Swaziland|
|Antigua and Barbuda||Bahamas||Barbados||Belize|
|Dominican Republic||El Salvador||Grenada||Guatemala|
|Nicaragua||Panama||Saint Kitts and Nevis||Saint Lucia|
|Saint Vincent and the Grenadines||Trinidad and Tobago||United States of America||Argentina|
|Saudi Arabia||Singapore||South Korea||Sri Lanka|
|Timor-Leste||Turkey||Turkmenistan||United Arab Emirates (UAE)|
|Papua New Guinea||Samoa||Solomon Islands||Tonga|