With in-house quality testing and certification, you can count on quality materials delivered with proper documentation.
End Cross Tubes Manufacturer
FIN TUBES : End Cross Tubes | Stainless Steel End Cross Tubes| Cupro Nickel End Cross Tubes
Stainless Steel End Cross Tubes Manufacturer in India, Cupro Nickel End Cross Tubes Exporter in Australia.
End cross tubes refer to heat exchanger tubes that have been fabricated with specialized end configurations, often in the form of “cross-like” shapes. These tubes are used in heat exchanger assemblies to facilitate fluid flow and improve the efficiency of heat transfer.
The key specifications of end cross tubes include the base tube diameter options, which are typically available in sizes of 1/2’’, 5/8’’, and 3/4’’ (12.70 mm, 15.875 mm, and 19.05 mm). The tube material options include stainless steel, copper, and cupro-nickel, each offering different properties of corrosion resistance, thermal conductivity, and mechanical strength to suit specific application requirements.
One significant advantage of end cross tubes is their relatively thin wall thickness, which can be as low as 0.65 mm. This thin wall construction ensures that the tubes provide efficient heat transfer while maintaining compactness and lightweight characteristics in the heat exchanger design.
These tubes are commonly used in various industries and applications where efficient heat exchange is crucial, such as in air-cooled heat exchangers, refrigeration systems, and HVAC units. The end cross configuration allows for improved fluid flow distribution, enhancing heat transfer performance within the heat exchanger.
Copper Nickel End Cross Tubes Exporter in Dubai, Steel End Cross Tubes Stockiest, Supplier.
Let’s discuss about your ongoing project
- Base Tube Diameter: 1/2’’ / 5/8″ & 3/4″ (12.70 mm, 15.875 mm, 19.05 mm)
- Tube Material: Stainless Steel / Copper / Cupro-Nickel
- Wall thickness as low as: 0.65 mm
End Cross Tubes are marked in requirement of the international standards. Format: ” BRAND-SIZE-SPECIFICATION-GRADE-HEAT NUMBER-LOT NUMBER “
This marking helps for the identification of the End Cross Tubes and supported with the Material Test Report. It is 100% traceable to our mill.
End Cross Tubes Quality Control
To ensure a quality product, MPJ is holding certificate ISO 9001:2015, ISO 45001, OHSAS 14001, & CE-PED. We are also members of various renowned agencies and Chambers of Commerce including MASSMA, EEPC, FICCI, FIEO, Indian Merchants Chamber, etc. With state-of-the-art manufacturing processes, contemporary technologies, and proficient services, we consider: offering the finest quality, best in class products. Compliance with specifications as per Standards, Outer Diameter, Thickness, Inside Diameter, Inside Finish, Marking, Ends, and Finishing. This ensures that we never face a rejection of the Stainless Steel End Cross Tubes supplied.
End Cross Tubes Packing & Documentation
End Cross Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel End Cross Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container.
MPJ Provide End Cross Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Cupro Nickel End Cross Tubes.
We also confirm the guarantee of the End Cross Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
End Cross Tubes Application Industries
- Oil & Gas Exploration
- Petrochemicals and Refineries
- Cross Country Pipe Line for Gas & Water
- Pipes for Engineering purpose
- Thermal, Nuclear and Solar Power Plants
- Desalination Plants
- Chemical Industries
- Atomic Energy
- Food and Dairy
People Also Search For
End Cross Tubes Supplier in Australia | Stanless Steel End Cross Tubes Exporter in Qatar | SS End Cross Tubes Stockiest in India | Stainless Steel End Cross Tube | End Cross Tubes Specification | End Cross Tubes Stockiest in India | End Cross Tubo | End Cross Tubes Sizes in Stock | End Cross Tubes Forms in Stock.
End Cross Tubes Inspection & Material Specification | End Cross Tubes Size | End Cross Tubes Installation | End Cross Tubes Exporter in Qatar | End Cross Tubes Installation Guidelines | End Cross Tubes OD | End Cross Tubes Supplier in South Africa | SS End Cross Tubes Price in India | End Cross Tubes Dimensions, Diameter, Thickness and Drawing | End Cross Tubes Stockiest in India.
Industrial Pipes & Tubes Supply and Export Network Countries List
|Azerbaijan||Belarus||Belgium||Bosnia and Herzegovina|
|United Kingdom||Vatican City|
|Burkina Faso||Burundi||Cabo Verde||Cameroon|
|Central African Republic (CAR)||Chad||Comoros||The Democratic Republic of the Congo|
|Republic of the Congo||Cote d’Ivoire||Djibouti||Egypt|
|Niger||Nigeria||Rwanda||Sao Tome and Principe|
|South Africa||South Sudan||Sudan||Swaziland|
|Antigua and Barbuda||Bahamas||Barbados||Belize|
|Dominican Republic||El Salvador||Grenada||Guatemala|
|Nicaragua||Panama||Saint Kitts and Nevis||Saint Lucia|
|Saint Vincent and the Grenadines||Trinidad and Tobago||United States of America||Argentina|
|Saudi Arabia||Singapore||South Korea||Sri Lanka|
|Timor-Leste||Turkey||Turkmenistan||United Arab Emirates (UAE)|
|Papua New Guinea||Samoa||Solomon Islands||Tonga|